Fabric Panels


Acoustical Wall Panels ABW by ABSOL Intl. are the solution for areas that require noise reduction and are available in a variety of models for various applications. The ABW Wall Panel is manufactured to the highest standards and is specifically designed as a standard absorber panel that offers an economical way to resolve reverberant noise problems. Application for the ABW panels includes schools, universities, offices, airports, churches, restaurants and any area where excess reverberation is a problem.

The ABW Standard Wall Panel provides the ultimate in performance with excellent NRC ratings. Available in four standard thicknesses: 1/2”, 1”, 1 1/2” and 2” with custom thickness available. ABW Panels are constructed with a 8# PCF rigid Rockwool absorber core. The edges are hardened with 6mm MDF and available in 4 edge profiles. ABW panels are available in standard or custom-sizes (up to a maximum of 5’ X 10’) with custom, designer or C.O.M fabric available.

Installation of the ABW panels is simplistic using mechanical clips, adhesive or hook & loop. Consult with factory on the best-suited mounting for your specific application.
Finishes
 
 
Guilford of Maine FR701 Style 2100 is standard. Hundreds of approved decorator fabrics are also available from numerous manufacturers including, but not limited to: Guilford of Maine, Deepa Textiles, Design Tex, Wolf Gordon, Momentum and Knoll. Customers may also specify their own fabric, provided the material meets manufacturing requirements.
 
Acoustical
 
NRC Rating
1/2” . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 - .60
1” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 - .90
11/2” . . . . . . . . . . . . . . . . . . . . . . . . . . 90 - 1.00
2” . . . . . . . . . . . . . . . . . . . . . . . . . . 1.05 - 1.15
 
All components shall have a Class A fire rating per ASTM E-84.

Installation Techniques:-
 
A) Impaling Clip( On walls)-
 
· In this case, the Impaling Clip is Glued or Screwed to the wall and is allowed to dry completely(If glued).
 
· Align panel and impaling clips so that impaling clip touches the fiberglass rather than the fabric wrapped around the back of the panel.
 
· Begin to press impaling clips into the back of the panel all the way onto the impaling clip so the panel is touching the wall making sure that the panel is pressed completely on to each of the impaling clips.
 


Designed and Hosted By Infobahn Consultancy